P a u l s o n b i l t
1000 West 11th Avenue
Coatesville, PA 19320

Phone [610] 384-6112
Fax [610] 380-0797

Paulsonbilt@verizon.net
HomeProductsManufacturing FacilityContact UsSpecs

Rear Load Container Specs
Four Cubic Yards and Above
Ten gauge bottoms and front slant.

Twelve gauge body sheets.

Seven gauge side and rear trim formed into a 3 x 5 channel with a rebend.

Minimum seven gauge gussets.

Minimum seven gauge bumper plates.

Plastic lids.

2  3/4x2-1/2x12" rear overhead hook members with one 1" cold rolled pin 5" long.

Four yard underskids two 7 gauge 8" high hat sections going across container bottoms (Option available- 4 swivel casters for same price).

Four yarder trunnion bar 1-3/4".

Six yard underskids are made of three 7 guage hat sections going full length of container bottom.

Six yarder trunnion bar 2".

Seven gauge 1-1/4" x 3" horizontal channel under trunnion bar.

Seven gauge 1-1/4" x 3" vertical channel centered under trunnion bar.

All seams are completely welded including floor, sides and top. Top trim has interlocking corners, no seperate overlapping corner parts.

Containers are scraped, ground and cleaned thoroughly. They are primed and painted outside including the bottom sides and top.

The rear load container size and price includes delivery to your yard or stop!
...Consider Our No Cost Demo To You...